Waterstops according to DIN 7865 for the sealing of structural joints in concrete constructions
Introduction
Waterstops are used for the sealing of structural Joints in concrete constructions and must be permanently water-tight. The selection of the suitable Waterstops depends on the influence to which the structure is subject:
– Joint type : Construction-, compression-, expansion joints.
– Movement : From shrinkage, construction, temperature cycles, dynamic loads, etc.
– Water pressure : Pressing or not pressing water.
– Others : For example a contact with chemical media, bitumen.
Proper selection of the Waterstop preserves the substance of the structure during the service life and prevents cost-intensive rehabilitation measures ranging from subsequent injection to complete remediation of the concrete. Besides proper selection, another decisive factor is the state. Of-the-art planning of entire Waterstop system which can be installed by the supplier as well as by the customer. Complex systems, special moldings or connections which have been manufactured on side should be in principle always be entrusted to a qualified company with a corresponding experience record.
– Administration building
– Underground car park
– Bridge
– Trough structure
– Tunnel for railroad and road
– Water treatment plant
– Floodgate
– Weirs
– Barrage
– Dam-
– Power plant
Summary Waterstops
A summary of extract-profile Waterstops is given in the table underneath
In appendix 1, 2 and 3 you will find technical drawings of the Waterstops
| Joint-type | Waterstop-type | Solid Rubber | Steel strip |
| Work-joint | External Waterstop Internal Waterstop | A 250 A 350 A 500 F 200 F 250 F 300 F 350-2 | FS310 |
| Expansion joint | External Waterstop Internal Waterstop Sealing Waterstop | AM 250 AM 350 AM 500 FM 200 FM 250 FM 300 FM 350 FM 400 FM 500 FVK 5 / 2 FAE 50 FAE 70 FVK 7 / 4 FVK 7 / 5 FAE 100 FAE 150 FVK 15 / 7 ACME 20,30,45,60 | FMS 350 FMS 400 FMS 500 FMS 400 MU FMS 500 MU |
ATC provide a full range of solutions and supply of Synthetic Rubber products for the following industries.
Industries:
AUTOMOTIVE – BUILDING INDUSTRY – CONSTRUCTION EQUIPMENT – ENERGY – FURNITURE – INDUSTRY – ENERGY – MEDICAL – INFRASTRUCTURE – TRANSPORTATION- SHIPPING / OFFSHORE
Extruded Rubber Profiles:
RUBBER PROFILES – GASKETS – HEADLINERS / PANELS – HEAT SHIELDS –INSULATIONS – FURNITURE / OFFICE – SOUNDABSORBER – VIBRATION DAMPER -NOISE SHIELDS – PLASTIC / TAP PARTS – CLEAN ROOM PRODUCTS –EXTRUDED PLASTIC / TAP PROFILE
GET IN TOUCH
* GERMANY * SINGAPORE * MALAYSIA * INDONESIA * THAILAND *